Mandola/waldzither Bridge: split saddle

    This is a hand-made replacement bridge in ebony or rosewood and fretwire saddle, to fit flat-top or domed mandolas or waldzithers.

   It is 120mm long, 20mm tall before fitting, and 7-8mm wide at the base. The saddle is split and approximately 60mm long. Compensation is roughly 2-3mm String slots can be cut if required but I will need to know spread and gauges.

   It will suit required bridge heights of 5-20mm. N.B. Exact height possible will depend on any curvature of the top.

   It will need to be fitted.